When working with electricity, safety is always the most important concern. Before starting any work, it is imperative that you make sure you are absolutely qualified to make the repairs you are planning. If there is any doubt, you should contact a professional electrician.
If you do have a project which you find you are qualified to undertake, you should make sure to always turn off the power to the circuit you want to work on by switching the circuit breaker to OFF in your main panel. The floor you are standing on should not be damp. Do not touch plumbing or gas piping. Be sure to test wires before you touch them to make sure the power has been turned off. It is important that you understand your system and electrical safety procedures before you start.
You may also need a permit. If you are doing the work yourself, you must purchase the permit and have the city inspector inspect your work. Projects which do not require a permit are replacing existing receptacles, replacing or changing a light fixture, or installing a phone or coax cable for cable television. You will need a permit for most other jobs, like adding or extending circuits danger, new wiring, installing a new panel, installing a new receptacle or light fixture in a location that did not have one previously, and restoring electrical service. Permits are necessary – you could be subject to civil penalties if you do not obtain the required permits and inspections. It is a way to protect your investment because these inspections prevent home fires. It is estimated that $450 million a year in property damage results from fires caused by faulty electrical wiring. Check with your local building department to find out if you need to acquire a permit.
If you have a shadow of a doubt, err on the safe side. B&G Electrical is a licensed professional electrical contractor and can help you with the largest or the smallest jobs. Just call!
Phone: (904) 620-0081
Toll Free: (800) 965-0081
Fax: (904) 620-9815